- Products
- » ISPAIR Wireless ISP System » ISPAIR 54Mb CPE 500 Series
ISPAIR 54Mb CPE 500 Series
Description:
ISPAIR 54Mb CPE 500 series are used to provide Internet access to end-users using Point-to-MultiPoint architecture at 54Mbps in 2.4GHz and 5GHz ISM unlicensed band, 2.3 to 2.5 Licensed band, 4.9GHz Public Safety Band, and future Licensed and Unlicensed Bands. Wireless data links take place where there is no infrastructure for Internet access or in places where bandwidth offered by current channels is too low. With our wireless equipment you can get high bandwidth on very long distances at a very reasonable price. Our equipment provides various features including Routing, Firewall NAT, DHCP, bandwidth control and many more.
The Client CPE with Integrated Antenna is the most comprehensive wireless solution, which includes powerful wireless router with Power over Ethernet (PoE) feature, all embedded in high-gain directional antenna. Flat Panel Antenna offers wide territorial coverage with no signal waste and the Power over Ethernet injector provides the possibility to deliver both necessary power and data to your router (which is attached to the antenna) over a single Ethernet cable.
Features:
- Cost effective solution
- Complete Outdoor Weatherproof Solution
- All-in-One Wireless CPE device
- Integrated Power over Ethernet
- Web Management and SNMP support
- High-speed wireless data links (Up to 54Mbps)
- Connection distance up to 20 miles (32km)
- Firewall, NAT, IP Routing, DHCP
- High level security with full 64/128Bit WEP Encryption
- Atheros XR Chipset - Advanced log-range features
- WDS - Wireless Distribution System
- Bandwidth control
- Antenna Alignment and Wireless Site Survey
- Fast and simple installation for base station and Clients
Applications:
 |
2.4GHz CPE Specifications:
Radio Characteristics |
|
|---|---|
| Ethernet Port | 10/100Base-TX (RJ-45) |
| Operating Frequency/Channel |
ISP-CPE500G/ISP-CPE500GHP/ISP-CPE500GUHP 2300 ~ 2500 MHz (*) 2.412 ~ 2.497GHz (ISM Band) (*) (*)Programmable for different country regulations |
| Channel Bandwidth | 5, 10 or 20 MHz (Selected by Software) |
| RF Modulation |
ISP-CPE500G/ISP-CPE500GHP/ISP-CPE500GUHP: 802.11b: DSSS (BPSK, QPSK, CCK) 802.11g: OFDM (BPSK,QPSK, 16-QAM, 64-QAM) |
| RF Output Power | ISP-CPE500G:
20dBm at Radio / 35dBm at EIRP ISP-CPE500GHP: 23dBm at Radio / 42dBm at EIRP ISP-CPE500GUHP: 26dBm at Radio / 45dBm at EIRP |
| Sensitivity | -90dBm@6Mb -70dBm@54Mb |
| Data Rate | 54, 48, 36, 24, 18, 12, 11, 5.5, 2, 1Mbps |
| RF Operation Mode | Access Point (bridge or router function) AP Client (bridge or router function) Station (bridge or router function) Repeater (bridge function) WDS (bridge function) Ad-Hoc (bridge function) |
| Range |
ISP-CPE500G: 5 miles (8 Km) ISP-CPE500GHP: 15 miles (24 Km) ISP-CPE500GUHP: 20 miles (32 Km) |
| Data Security |
Access Control List WEP 64/128 WPA1/WPA2 with TKIP & AES ciphers |
| Network Advanced Features |
Transparent Bridging Layer 2 (Mac Address) Forwarding Layer 3 (IP Address) Forwarding Static Routing DHCP Server and Client PPPoE Client/PPTP Clien Vlan (802.1Q) Support Advance Statistics Graphical User Interface Monitor Utilities (Ping and Trace Route) |
| Link parameters | Antenna alignment and RSSI Signal levels Site Survey Radio and Ethernet Traffic Statistics |
| Management | Web and NETKROM NMS – Network Management System |
| Power | Power over Ethernet – PoE 802.3af (AC 110~220/DC 48V) with surge protector |
| Dimensions | ISP-CPE500G:
10.75" x 10.75" x 2.6" in (267 x 267 x 67mm) ISP-CPE500GHP/ISP-CPE500GUHP: 18.5" x 16.8" x 2.5" in (470 x 427 x 64mm) |
| Weight |
ISP-CPE500G:
4 Lb (1.8 Kg) complete set ISP-CPE500GHP/ISP-CPE500GUHP: 6 Lb (2.7 Kg) complete set |
| Cable | 50", 100", 150", or 200" length Outdoor CAT5E Rated Shielded Cable (Optional) |
| Humidity | -10-90%, (Operating) |
| Temperature | -40° to 167° F (-40° to 75° C) |
| Compliant | FCC Part 15 class B, CE Mark, ETSI 300 328 |
Antenna Characteristics |
|
|---|---|
| Gain |
ISP-CPE500G: 15 dBi ISP-CPE500GHP/ISP-CPE500GUHP: 19 dBi |
| Frequency Range |
ISP-CPE500G/ISP-CPE500GHP/ISP-CPE500GUHP: 2300 – 2500MHz |
| 3db Beam Angle (E-Plane) | ISP-CPE500G:
30 Deg ISP-CPE500GHP / ISP-CPE500GUHP : 15° |
| 3dB Beam Angle (H-Plane) |
ISP-CPE500G:
30 Deg ISP-CPE500GHP / ISP-CPE500GUHP: 20 ° |
| Polarization | Horizontal or Vertical |
Ordering Information:
 |
ISP-CPE500G | ISPAIR 54Mb 2.3 to 2.5GHz 802.11b/g CPE short range subscriber 5 miles - 8Km |
|
ISP-CPE500GHP | ISPAIR 54Mb 2.3 to 2.5GHz 802.11b/g CPE long range subscriber 15 miles - 24Km |
|
ISP-CPE500GUHP | ISPAIR 54Mb 2.3 to 2.5GHz 802.11b/g CPE ultra long range subscriber 20 miles - 32Km |
5GHz CPE Specifications:
Radio Characteristics |
|
|---|---|
| Ethernet Port | 10/100Base-TX (RJ-45) |
| Operating Frequency/Channel | 4.9GHz Band: |
| Channel Bandwidth | 5, 10 or 20 MHz (Selected by Software) |
| RF Modulation | 802.11a: OFDM (BPSK,QPSK, 16-QAM, 64-QAM) |
| RF Output Power | ISP-CPE500A: 18dBm at Radio
/ 37dBm at EIRP ISP-CPE500AHP: 23dBm at Radio / 47dBm at EIRP ISP-CPE500AUHP: 26dBm at Radio / 50dBm at EIRP |
| Sensitivity | -90dBm@6Mb -70dBm@54Mb |
| Data Rate | 54, 48, 36, 24, 18, 12, 11, 5.5, 2, 1Mbps |
| RF Operation Mode | Access Point (bridge or router function) AP Client (bridge or router function) Station (bridge or router function) Repeater (bridge function) WDS (bridge function) Ad-Hoc (bridge function) |
| Range | ISP-CPE500A: 5 miles (8 Km) ISP-CPE500AHP: 15 miles (24 Km) ISP-CPE500AUHP: 20 miles (32 Km) |
| Data Security |
Access Control List WEP 64/128 WPA1, WPA2 with TKIP & AES cyphers |
| Network Advanced Features |
Transparent Bridging Layer 2 (Mac Address) Forwarding Layer 3 (IP Address) Forwarding Static Routing DHCP Server and Client PPPoE Client/PPTP Client Vlan (802.1Q) Support Advance Statistics Graphical User Interface Monitor Utilities (Ping and Trace Route) |
| Link parameters | Antenna alignment and RSSI Signal levels Site Survey Radio and Ethernet Traffic Statistics |
| Management | Web and NETKROM NMS – Network Management System |
| Power | Power over Ethernet – PoE 802.3af (AC 110~220/DC 48V) with surge protector |
| Dimensions | ISP-CPE500A: 10.75" x 10.75" x 2.6" in (267 x 267 x 67mm) ISP-CPE500AHP / ISP-CPE500AUHP: 18.5" x 16.8" x 2.5" in (470 x 427 x 64mm) |
| Weight | ISP-CPE500A: 4 Lb (1.8 Kg) complete set ISP-CPE500GAHP/ISP-CPE500AUHP: 6 Lb (2.7 Kg) complete set |
| Cable | 50", 100", 150", or 200" length Outdoor CAT5E Rated Shielded Cable (Optional) |
| Humidity | -10-90%, (Operating) |
| Temperature | -40° to 167° F (-40° to 75° C) |
| Compliant | FCC Part 15 class B, CE Mark, ETSI 300 328 |
Antenna Characteristics |
|
|---|---|
| Gain | ISP-CPE500A: 19 dBi ISP-CPE500AHP/ISP-CPE500AUHP: 24 dBi |
| Frequency Range | 4940-4990MHz (public Safety Band) 5150-5850MHz |
| 3db Beam Angle (E-Plane) | ISP-CPE500A: 15° ISP-CPE500AHP / ISP-CPE500AUHP : 9° |
| 3dB Beam Angle (H-Plane) | ISP-CPE500A: 15° ISP-CPE500AHP / ISP-CPE500AUHP: 9 ° |
| Polarization | Horizontal or Vertical |
WE PROTECT YOUR INVESTMENT : WiMAX and 801.11n support
|
As a company focused exclusively on Wireless data transmission, Netkrom is committed to long-term product planning, backwards compatibility and the integration of new technologies that will allow it to support traditional enterprise markets. |
OEM/ODM/WISP ATTENTION - For special frecuency version, MMDS and Licenced band (2300 to 2700 MHz & 4900 to 6100 MHz) Contact us - For customization or special firmware version and support for open source Linux software Contact us |
Ordering Information:
|
ISP-CPE500A | ISPAIR 54Mb 4.9 to 5.8GHz 802.11a CPE short range subscriber 5 miles - 8Km |
|
ISP-CPE500AHP | ISPAIR 54Mb 4.9 to 5.8GHz 802.11a CPE long range subscriber 15 miles - 24Km |
|
ISP-CPE500AUHP | ISPAIR 54Mb 4.9 to 5.8GHz 802.11a CPE ultra long range subscriber 20 miles - 32Km |
