AIRNET 54Mb 802.11b/g Ultra High Power AP/Router with built-in 4-port Switch Coming Soon!

AP-111GUHP
  For OEM/ODM version & large Qty contact us  

Description:

AIR-AP111GUHP is an IEEE802.11b/g compliant with 11 Mbps & 54 Mbps Wireless Access Points. The Wireless Access Point is equipped with Five M Auto-sensing 10/100 Ethernet port for connecting to LAN.

AIR-AP111GUHP is the world's most popular multi-function access point. It features an impressive total of 8 wireless multi-function modes that are not available in normal access points. From an ordinary AP application to a Hotspot and WISP usage, you will find the AIR-AP111GUHP is the device you want.

AIR-AP111GUHP provides 64/128bit WEP encryption, WPA-PSK, WPA2-PSK, IEEE802.1x, and WPA Enterprise support in AP+WDS mode which ensures a very high level of security to protect users’ data and privacy. The MAC Address filter prevents the unauthorized MAC Addresses from accessing your Wireless LAN. Your network security is therefore double assured.

AIR-AP111GUHP can work in 8 operating modes:

  • AP / Bridge mode
  • Client / Bridge mode
  • WDS
  • AP+WDS
  • Universal Repeater
  • WISP (Client Router) mode
  • WISP + Universal Repeater mode
  • AP + Router mode
Web Management
The AP's is configured through web browser for easy and fast configuration. And you will not find an AP with more functions than the Netkrom series. Starting with the multi-mode function for the AP. Then we add both 802.1x accounting and authentication ports for WISP application. The new firmware includes TX power regulation in 5 levels.

Wireless Client Isolation (Block Relay Between Clients function)
The AIR-AP111GUHP features the new Wireless Client Isolation function previous available only in more expensive APs. When you enable this function, the wireless clients will not be able to see each other. Therefore, it is an important function for office and Hotspot operator to protect the security between different wireless users.

ACK Time out and TX Power Regulation
The AIR-AP111GUHP features ACK timeout function to let you adjust the timeout value for long distance operation. In addition 5-level TX power adjustment lets you match different antennas for law compliance. The ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier.

Extended Security Features
Netkrom has gone the extra mile to ensure wireless security. 64/128-bit port WEP, WPA and WPA2 encryption, access control and control of Denial of Service (DoS) is provided to prevent unwanted intruders. In addition, WPA enterprise for 802.1x authenticator is featured for AP and WDS mode.

Whether it's for office or home environment, the Netkrom 802.11g family brings you the maximum performance and security for today's high speed wireless network.

Features:

  • Complies with IEEE 802.11b/g wireless standards .
  • High Power AP/Router up to 30 dBm / 1000mW with 5 dBi detachable antenna.
  • Provides one 10/100Mbps Auto-Negotiation Ethernet WAN ports for WAN connection.
  • Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports for LAN connections.
  • AP, Client, WDS, WDS+AP, Universal Repeater, WISP Client Router, WISP + Universal Repeater, Gateway Mode
  • Bandwidth Control and Antenna Alignment Signal Survey
  • Wireless Client Isolation, Watchdog, ACK Timeout, TX power and TX rate adjustable, IAPP.
  • Supports WEP 64/128 bit, WPA-PSK, WPA2-PSK encryption. WPA Enterprise support in AP+WDS
  • Supports data rate automatic fallback.
  • Automatic channel selection.
  • Supports 802.1x/Radius client with EAP-TLS, TKIP, and AES encryption.
  • Supports System event log and statistics
  • TCP/UDP/ICMP/ARP protocol stack.
  • UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
  • PPPoE PPTP

Applications:





Specifications:

Description
Specifications
Standard IEEE 802.11b/g
Speed 54Mbps
Frequency Range

2.4GHz – 2.4835GHz ISM Band, DSSS

Wireless Operating Range 802.11b: 800m (11Mbps outdoor), 150m (11Mbps indoor)
802.11g: 600m (54Mbps outdoor), 100m (54Mbps indoor)
Network Interface One 10/100BaseT with RJ45 port (WAN)
Four 10/100BaseT with RJ45 ports (LAN)
Modulation Techniques

11g Orthogonal Frequency Division Multiplexing (64QAM, 16QAM, QPSK, BPSK)
11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Data Rate: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps

Operating Channels 13 Channels
RF Operation Mode

AP / Bridge Mode
Client / Bridge Mode
WDS
WDS + AP
WDS Repeater
Universal Repeater
WISP (Client Router)
WISP + Universal Repeater
AP + Router

Security

WEP 64/128-bit
802.1x Radius Support
WPA/WPA2-PSK support
WPA Enterprise support in AP+WDS mode

WISP Mode

DHCP, PPTP, L2TP, PPPoE ISP Authentication Support
Wireless Client function as WAN
To configure the WISP mode, you PC must be connected to the LAN port

Gateway Mode

1 WAN and 4 LAN ports
NAT Routing between WAN and LAN port
Wireless used for LAN side
Virtual Server, MAC filtering, DMZ, Firewall, IP filtering functions
UPnP, Dynamic DNS, Static Routing, VPN Pass-through.

Management

HTTP/ HTTPS Web Server

Antenna Type Detachable 5 dBi Dipole Antenna with Reversed SMA Connector
LED indicators Power, LAN, WLAN LED Indicators
Power Requirements DC 12V @ 1A PoE power supply
Output Power 30dBm Adjustable in 5 levels
Certifications FCC, CE

Environmental Requirements

Operating temperature: 0~60°C
Operating humidity (non-condensing): 20~80%
Storage temperature: -20~65°C
Storage Humidity: 95% Max

Dimensions (H x W x D) 135 x 91 x 24 mm (LxWxH)

Ordering Information:



 AIR-AP111GUHP

 AIRNET 54Mb 802.11b/g Ultra High Power AP/Router with built-in 4-port Switch (30dBm/1Watt) RP-SMA external antenna connector

[ Top ]



 Account

 Shopping Cart
 Items in Cart: 
 Current Total: 
 View Cart /Check Out

 Live Help
 
 

 More Info

Questions? Call Us
(305) 418-2232
or write us here