AIRNET 54Mb 802.11b/g Indoor High Power Access Point with 802.11af PoE

Products
- » AIRNET WLAN Indoor
  - » AIRNET 54Mb 802.11b/g Indoor High Power Access Point
    with 802.11af PoE

AIRNET 54Mb 802.11b/g Indoor High Power Access Point
with 802.11af PoE

For OEM/ODM version & large Qty contact us

Description:

The AIR-AP500GHP Access Point is a high-performance AP that is designed for enterprise and public access applications. Embedded with Atheros chipset, it boasts network robustness and stability and wider network coverage. Based on 802.11g, it has a transfer speed 10X faster than 802.11b. It supports high-speed data transmission of up to 54Mbps at 2.4GHz.

AIR-AP500GHP is capable of support operating in different modes such as Access Point Bridging, Access Point Client, Gateway, Wireless Bridge Link, Wireless Routing Client and Wireless Ethernet, which makes it suitable for a variety of wireless applications and deployments. Network administrators can make use of the SNMP feature included in the web management for easy user management. Equipped with SMA antennas, AIR-AP500GH/GHP provides a wider coverage for your network. An integrated Power over Ethernet (PoE) allows this device to be used in areas where power outlets are not readily available.

To protect your security and privacy, AIR-AP500GH/GHP is armed with many enhanced wireless security features compatible with WPA™, WPA2™ (with Advanced Encryption Standard Algorithm) MAC Address Filtering, IEEE 802.1x Authentication and 64/128-bit WEP (Wired Equivalent Privacy) to ensure privacy for the heterogeneous mix of users within the same wireless LAN, while maintaining full access to the establishment's resources.

AIR-AP500GHP also incorporates unique features such as - the Parallel Broadband feature, which allows bandwidth aggregation and fail-over redundancy capability. When set to gateway mode, it uses Wireless Distribution System (WDS) to wirelessly link all associated access point gateway together. Long-Range parameter settings provide this device with the ability to auto-calculate parameters such as slot time, ACK time-out and CTS time-out on the wireless device based on range requirements to achieve a longer range. Spanning Tree Protocol (STP) provides the wireless network with extra redundancy and reliability that the network will auto-reconfigure when there are changes to the network connections. Pseudo VLAN feature enables the creation of wireless isolated nodes or workgroups between wireless clients to increase network privacy in a wireless LAN installation.

AIR-AP500GHP can work in 7 operating modes:

Access Point Bridging

Access Point Client

Gateway

Wireless Routing Client

Wireless Ethernet Adapter

Point-to-Point using dedicated bridge link

Point-to-MultiPoint using dedicated bridge link

Features:

IEEE 802.11a/b/g (2.4).
"ClearVoice" Band.
Speed up to 54Mbps.
Atheros eXtended Range (XR) Technology.
SMA Antenna Support
Integrated Power-over-Ethernet(PoE)
Supports 7 Operating Modes
Long Range Parameter Settings
WMM (QoS) Support
Parallel Broadband
Wireless Distribution System
WEP & WPA2 Support
Pseudo VLAN
Spanning Tree Protocol
Web-based and Telnet Configuration

Applications:

Small Wireless ISP
A first mile solution now is simple with AIRNET 54 Mbps access points. No wiring is required and the provided bandwidth can be up to 54Mbps. By installing AIR-AP500GHP equipped with omni-directional antenna in the user’s neighborhood, all users around the access point can easily connect to Internet through the access point by installing a wireless USB Adapter, PCI Card or a AIR-AP500GHP in client mode.

LAN to LAN or LAN to Multi-LAN Connection
Wiring inside your own building may be an easy job, but it is hard if network cabling needs to route through some public areas or difficult wiring environments. AIRNET 54 Mbps Wireless Access Point, can work in bridge mode to provide a robust solution for connecting two or more wired Ethernet buildings. By extending distance, using NETKROM’s external antenna, the installation is easy and the distance between buildings can be 20Km or more.

Specifications:

Description	Specifications
Standard	IEEE 802.11b/g
Speed	54Mbps with extended Range
Frequency Range	2.400 ~ 2.497 GHz (Programmable for different country regulations)
Wireless Operating Range	AIR-AP500GHP 802.11b: 500m (11Mbps outdoor), 80m (11Mbps indoor) 802.11g: 160m (54Mbps outdoor), 70m (54Mbps indoor)
Network Interface	2 RJ45 10/100Mbps auto-negotiating Ethernet Port
Modulation Techniques	802.11b: DSSS (BPSK, QPSK, CCK) 802.11g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Operating Channels	11 Channels: US and Canada 13 Channels: Europe 14 Channels: Japan
RF Operation Mode	Access Point Bridging Access Point Client Gateway Wireless Routing Client Wireless Ethernet Adapter Point-to-Point using dedicated bridge link Point-to-MultiPoint using dedicated bridge link
Security	Station Isolation MAC Filtering 64 / 128-bit WEP 802.1x authentication WPA-EAP and WPA-PSK, WPA2
Advanced Features	Long Range Parameter Settings Spanning Tree Protocol Parallel Broadband (Only in Gateway) IEEE 802.11h (DFS & TPC) DFS (On/Off) Ability SNMP Trap Antenna Control Antenna Alignment DHCP Relay (Only in Routing Mode) Remote Upgrade of Firmware RIP 1 / 2 (Only in Routing Mode) Build-in DHCP server Transmission Power Control (One dB per step) Closed System (suppress SSID) Transmission Rate Control
WAN Type	Static IP Dynamic IP PPPoE PPTP
Management	HTTP/ HTTPS Web Server SNMP V2c Telnet / Secure Shell (SSH)
Antenna Type	Detachable 2dBi antenna with RP-SMA connector
LED indicators	Power, Diagnostic, LAN, WAN, WLAN
Power Requirements	12VDC ( Can Range from 24V to 48V)
Output Power	AIR-AP500GHP: 26dBm
Certifications	FCC, CE Mark
Environmental Requirements	Operating temperature: -20°C to 70°C Storage Temperature: -30°C to 80°C Operating Humidity: 10% to 80% relative humidity non-condensing
Dimensions (H x W x D)	5.7 in. (145mm) x 5.2 in (132mm) x 1.6 in (41mm)
Weight	9.2oz (260gr)